ARC31 Catalog Precision Dat

  • Stainless Steel Round Top Rails

    Formed type 304 and 316, welded channel, #8 (polished) and #4 (brushed) finishes are standard. Available for 1/2” glass at 10’ lengths.

    Click on image to enlarge    Magnifying Glass
    S16-0112-0400

    S16-0112-0400

    Product Details
    Part # CAD Drawing Cut Sheet A B C D
    S16-0112 dwg pdf dwg 1 1/2" 5/8" 1" .050
    S16-0200       2" 3/4" 1 1/2" .050
    S16-0212       2 1/2" 3/4" 1 1/2" .065
    S16-0300       3" 3/4" 1 1/2" .065
    S16-0312       3 1/2" 3/4" 1 1/2" .065
    S16-0400       4" 3/4" 1 1/2" .065
  • Stainless Steel Connector Sleeves

    Connector Sleeves are used to connect Top Rail and railing sections together. Custom sizes also available.

    Click on image to enlarge    Magnifying Glass
    S16-0112-0400CS

    S16-0112-0400CS

    Product Details
    Part # A Tubing Size
    S16-0112CS 1 3/8" 1 1/2" x .050" wall
    S16-0200CS 1 7/8" 2" x .050" wall
    S16-0212CS 2 3/8" 2 1/2" x .065" wall
    S16-0300CS 2 7/8" 3" x .065" wall
    S16-0312CS 3 3/8" 3 1/2" x .065" wall
    S16-0400CS 3 7/8" 4" x .065" wall
  • Stainless Steel Top Rail End Caps

    End Caps fit securely into Top Rail for a finishing accent, either welded or fastened with adhesive. Available in #8 polished or #4 brushed finish.

    Click on image to enlarge    Magnifying Glass
    S16-0112-0400EC

    S16-0112-0400EC

    Product Details
    Part # A B
    S16-0112EC 1 1/2" .050"
    S16-0200EC 2" .050"
    S16-0212EC 2 1/2" .065"
    S16-0300EC 3" .065"
    S16-0312EC 3 1/2" .065"
    S16-0400EC 4" .065"
  • Stainless Steel Mitered Corners

    Fabricated from Morse Industries Top Rail and welded and finished to match. #8 (polished) and #4 (brushed) finishes are standard. All corners are fabricated per order. Please specify degree and location of glass pocket. Custom corners also available.

    Click on image to enlarge    Magnifying Glass
    S16-0112-0400C

    S16-0112-0400C

    Product Details
    Part # A B C D
    S16-0112C 1 1/2" 5/8" 2 3/8" 3 1/2"
    S16-0200C 2" 3/4" 2 5/8" 4"
    S16-0212C 2 1/2" 3/4" 2 7/8" 4 1/2"
    S16-0300C 3" 3/4" 3 1/8" 5"
    S16-0312C 3 1/2" 3/4" 3 3/8" 5 1/2"
    S16-0400C 4" 3/4" 3 5/8" 6"
  • Protective Insert for Top Rails

    Rigid vinyl protective insert is compatible with 1/2” monolithic glass. Providing a protective barrier, the insert protects glass panels when fitted inside top rail as well as aiding in alignment during installation. Stocked in 10 ft. lengths. These vinyl inserts are not compatible with 1 1/2” bump formed top rail.

    Click on image to enlarge    Magnifying Glass
    V50-000XBKA10

    V50-000XBKA10

    Product Details
    Part # Description CAD Drawing
    V50-0001BKA10 Top Rail Insert for 1/2” Monolithic Glass dwg pdf
  • Top Rail to Wall Support Mount

    Morse Industries Wall Support Mount provides lateral support if Top Rail is to be attached to a wall surface. Use #10, 82 degree countersunk fasteners. The Wall Support Mount is notdesigned for use with the 1 1/2” SS Bump Formed Top Rail, 1.7” SS Continuous Weld Round Top Rail, or 1.9” SS Continuous Weld Round Top Rail.

    Click on image to enlarge    Magnifying Glass
    A42-0010AEY

    A42-0010AEY

    Product Details
    Part # Description CAD Drawing Cut Sheet Width Height
    A42-0010AEY Wall Support Mount for Top Rails dwg pdf dwg 3/4" 1-1/4"

Contact Us: 1.800.325.7513

Connect With Us

New call-to-action    LinkedIn     Instagram

Back to Top